| LED-Mono-xx-5-SD Specifications
|
| Product Code: |
LED-Mono-xx-5-SD |
|
| FEATURES |
|
| Function: |
HIgh power LED luminaries. With ILC-100 any brightness level from OFF to full ON (<.5% steps) can be selected. Adhesive backing permits easy installation to non-porous surface. Non-waterproof |
| LED Configuration |
30 LEDs/meter. LED strip can be trimmed to size with scissor. |
| Standard Length |
5 meter length standard roll |
| Quiet Operation |
No EMI (electrical noise)-Home Theater Safe |
| Single Color Output |
Single color RGB elements. Choices available: white, blue, green, red, yellow. |
| CONTROLS/INTERFACES |
|
| Control Type |
Controls one or more IMC-100 controllers networked together on a CS-Bus |
| Control: |
Channel 1 Up/Down, Stop |
| Motor Control: |
1/3 hp 2.1 amp bi-directional AC motor (2 directions) |
| IR InputMotor Control: |
Built-in front panel IR receiver |
| Bus Specification |
CS-Bus compatible |
| CONNECTIONS |
|
| Power Connector: |
Power provided through a built-in 4-pin male power connector. Compatible with ILC-100 LED 4-wire output (12V+ positive anode, R, G, B). |
| Linking Power Connector (LPC) |
Additional lengths of similar LED-RGB strips can be directly plugged into an attached (female) connector on the trailing edge of the LED strip. Note: maximum of 5.0 meters of LED strips can be interconnected this way--additional lengths need to be separately run back to the ILC-100 itself.
Note: LPC not available on 5.0 meter strips |
| GENERAL |
|
| Form Factor |
Single gang Decora-type |
| Power Requirements: |
12v DC, .5amp per meter. Typical 5 meter strip requires 2.5 amps @12V or 30 watts. |
| Life Expentancy |
Long life--50,000 + hours expectancy |
| Dimensions: |
5 meters x 10mm x 2mm |
| Weight: |
80g |
| Manufacturing |
Made in China |
| COMPLIANCE |
|
| Safety Approvals: |
PCB UL rated |
| RoHS |
RoHS Compliant |
| EMI Testing: |
FCC Class B (home and office) |
Specifications
