rti

Integration Partner Modules-RTI

Device Driver(s) for lighting (LED) control products have been created by the engineering team at RTI as Certified Drivers. In addition, derivatives of these Drivers will be made available for our various motor control platforms. When these drivers are available, links to download locations will be provided. In the interim please note that device drivers can be written by RTI authorized dealers by utilizing the technical manual found within the Programming Kits section on this site and the "Raw CMD" function available within Integration Designer and the RTI Driver written for the ILC controller appearing below.

Note: If any sample projects are provided below, they are in .zip format. Download the file, unzip and open as a new project..

Model Interface Functions Sample Screens/Downloads
 
ILC-x00
LED Controller
IBT-100 (RS-232c)
  • Controls device(s) using RS-232-C communication
  • Controls lighting state (ON/OFF)
  • Controls lighting presets (P1-P24)
  • Controls lighting effects (Effect #1,#2)
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Enables bi-directional feedback for color states rate

Integration Notes


RTI Driver Site Download


Sample Integration Designer System File (with sample IOS screens)

ILC-x00
LED Controller
e-Node (IP)
  • Controls device(s) using RS-232-C communication
  • Controls lighting state (ON/OFF)
  • Controls lighting presets (P1-P24)
  • Controls lighting effects (Effect #1,#2)
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Enables bi-directional feedback for color states rate

Integration Notes


RTI Driver Site Download


Sample Integration Designer System File (with sample IOS screens)

IMC-100
Single Motor Controller
IBT-100 (RS-232c)
  • Controls motor direction (up,down, and stop)
  • Controls intermediate presets (IMC-100T)
  • Controls multiple zone, group, and node (Z.G.N) addresses

Integration Notes


RTI Driver Site Download


Sample Integration Designer System File (with sample IOS screens)

IMC-100
Single Motor Controller
e-Node (IP)
  • Controls motor direction (up,down, and stop)
  • Controls intermediate presets (IMC-100T)/li>
  • Controls multiple zone, group, and node (Z.G.N) addresses

Integration Notes


RTI Driver Site Download


Sample Integration Designer System File (with sample IOS screens)

IMC-300 (BRIC I)
Triple Motor Controller
Built-in Serial
  • Controls two separate motors digitally with up,down, and stop controls
  • Controls third motor (traditionally a door motor) with up and down controls
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Controls multiple BRIC addresses (units 1-4)
  • Controls up top 8 presets of multiple motors
  • *Enables bi-directional feedback for motor location (MKII)

Integration Notes


Module-RTI site


Module-CSI site


IMC-300 (BRIC I)
Triple Motor Controller
External IP (e-Node)
  • Controls two separate motors digitally with up,down, and stop controls
  • Controls third motor (traditionally a door motor) with up and down controls
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Controls multiple BRIC addresses (units 1-4)
  • Controls up top 8 presets of multiple motors
  • *Enables bi-directional feedback for motor location (MKII)

Integration Notes


RTI Driver Site Download


Sample Integration Designer System File (with sample IOS screens)