Converging Systems Integration Resources On Controls Page

oncontrols

Integration Partner Modules-ON Controls

Device Driver(s) for lighting (LED) control and motor control products have been created by the engineering team at On Control as Certified Drivers.

Note: If any sample projects are provided below, they are in .zip format. Download the file, unzip and open as a new project..

Model	Interface	Functions	Sample Screens/Downloads

ILC-x00 LED Controller	IBT-100 (RS-232c)	Controls device(s) using RS-232-C communication Controls lighting state (ON/OFF) Controls lighting presets (P1-P24) Controls lighting effects (Effect #1,#2) Controls multiple zone, group, and node (Z.G.N) addresses Controls setup, dissolve rate and sequence rate Enables bi-directional feedback for color states rate	Integration Notes Module Download-V2.0 Sample Project
ILC-x00 LED Controller	e-Node (IP)	Controls device(s) using RS-232-C communication Controls lighting state (ON/OFF) Controls lighting presets (P1-P24) Controls lighting effects (Effect #1,#2) Controls multiple zone, group, and node (Z.G.N) addresses Controls setup, dissolve rate and sequence rate Enables bi-directional feedback for color states rate	Integration Notes Module Download-V2.0 Sample Project
IMC-100 Single Motor Controller	IBT-100 (RS-232c)	Controls motor direction (up,down, and stop) Controls intermediate presets Controls multiple zone, group, and node (Z.G.N) addresses Controls lighting effects (Effect #1,#2). Controls setup, browse, and help menus Controls setup, dissolve rate and sequence rate *Enables bi-directional feedback for motor location	Integration Notes Module Download-V2.0 Sample Project
IMC-100 Single Motor Controller	e-Node (IP)	Controls motor direction (up,down, and stop) Controls intermediate presets Controls multiple zone, group, and node (Z.G.N) addresses Controls lighting effects (Effect #1,#2). Controls setup, browse, and help menus Controls setup, dissolve rate and sequence rate *Enables bi-directional feedback for motor location	Integration Notes Module Download-V2.0 Sample Project
IMC-300 (BRIC I) Triple Motor Controller	Built-in Serial	Controls two separate motors digitally with up,down, and stop controls Controls third motor (traditionally a door motor) with up and down controls Controls multiple zone, group, and node (Z.G.N) addresses Controls multiple BRIC addresses (units 1-4) Controls up top 8 presets of multiple motors *Enables bi-directional feedback for motor location (MKII)	Integration Notes Module Download-V2.0 Sample Project
IMC-300 (BRIC I) Triple Motor Controller	External IP (e-Node)	Controls two separate motors digitally with up,down, and stop controls Controls third motor (traditionally a door motor) with up and down controls Controls multiple zone, group, and node (Z.G.N) addresses Controls multiple BRIC addresses (units 1-4) Controls up top 8 presets of multiple motors *Enables bi-directional feedback for motor location (MKII)	Integration Notes Module Download-V2.0 Sample Project

Model

Interface

Functions

Sample Screens/Downloads