control4

Integration Partner Modules-Control4

Device Driver(s) for various motor and lighting (LED) control products have been created by various contributors to Control 4. When these drivers are available, links to download locations will be provided. In the interim. Note, device drivers can be written by Control 4 authorized dealers by utilizing the technical manual found within the Programming Kits section on this site. In some cases, you may find applicable drivers/profiles under "Local Download" below. These files are provided as a convenience to out dealers and are soley provided "AS IS" and without any support.

Note: If any sample projects are provided below, they are in .zip format. Download the file, unzip and open as a new project..

Model Interface Functions Sample Screens/Downloads
 
ILC-x00
LED Controller
IBT-100 (RS-232c)
  • Controls device(s) using RS-232-C communication
  • Controls lighting state (ON/OFF)
  • Controls lighting presets (P1-P24)
  • Controls lighting effects (Effect #1,#2)
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Enables bi-directional feedback for color states rate

Integration Notes


Module Download


Sample Project

ILC-x00
LED Controller
e-Node (IP)
  • Controls device(s) using RS-232-C communication
  • Controls lighting state (ON/OFF)
  • Controls lighting presets (P1-P24)
  • Controls lighting effects (Effect #1,#2)
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Enables bi-directional feedback for color states rate

Integration Notes


Module Download


Sample Project

IMC-100
Single Motor Controller
IBT-100 (RS-232c)
  • Controls motor direction (up,down, and stop)
  • Controls intermediate presets (IMC-100T)
  • Controls multiple zone, group, and node (Z.G.N) addresses

Integration Notes


Module Download


Sample Project

IMC-100
Single Motor Controller
e-Node (IP)
  • Controls motor direction (up,down, and stop)
  • Controls intermediate presets (IMC-100T)/li>
  • Controls multiple zone, group, and node (Z.G.N) addresses

Integration Notes


Module Download


Sample Project

IMC-300 (BRIC I)
Triple Motor Controller
Built-in Serial
  • Controls two separate motors digitally with up,down, and stop controls
  • Controls third motor (traditionally a door motor) with up and down controls
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Controls multiple BRIC addresses (units 1-4)
  • Controls up top 8 presets of multiple motors
  • *Enables bi-directional feedback for motor location (MKII)

Integration Notes


Module Download


Sample Project

IMC-300 (BRIC I)
Triple Motor Controller
External IP (e-Node)
  • Controls two separate motors digitally with up,down, and stop controls
  • Controls third motor (traditionally a door motor) with up and down controls
  • Controls multiple zone, group, and node (Z.G.N) addresses
  • Controls multiple BRIC addresses (units 1-4)
  • Controls up top 8 presets of multiple motors
  • *Enables bi-directional feedback for motor location (MKII)

Integration Notes


Module Download
(use IMC-100 with IP drivers)


Sample Project